Wall Mount Temperature Control, Alarm & Recording Units

The InstCube EC5B is a small wall mount temperature indicator and is dust and water proof to IP64*. It contains an Omron E5CB digital temperature indicator, with a large, bright display of the measured temperature. By default it is configured for Type K and 1°C resolution.

Note: Neither model is supplied with a power connector, so a suitable qualified person can wire directly on to the supply or fitted with a suitable connector as required.

Sensor Input: Type K Thermocouple, via mini socket
Resolution & Range (Type K): -200 to 1,300°C or -20.0 to 500.0°C (-300 to 2,300°F or 0.0 to 900.0°F)
IP Rating: IP64*
Size (Body): 125 x 100 x 90mm (WxDxH)
Size (Extremities): 150 x 140 x 100mm (WxDxH)
Supply Voltage (Mains Voltage Model): 100 to 240Vac 50/60Hz, with bare tails
Supply Voltage (Low Voltage Model): 24Vac 50/60Hz, or 24Vdc, with ring crimps on the tails

^{* Except thermocouple inline mini socket which is IP51}

Related Products: Similar products, accessories and other products suitable for use with this product.

Many laboratory ovens, furnaces and incubators that are left unattended overnight are not fitted with over-temperature protection as standard. This is a potentially dangerous Health and Safety risk. Retrofitting by the manufacturer is expensive and takes the unit out of commission while the work is done.

The answer is "InstCube". The wall-mounted unit, fitted with a Eurotherm digital indicating controller and 15 amp relay, is a self-contained over-temperature control unit, which just plugs into your existing system. No wiring, no fuss.

Fitted with a 13 amp lead and plug for a 230V socket, and a 13 amp controlled output socket in which to plug the furnace, oven or incubator to be protected, it comes complete with a type 'N' thermocouple (3mm diameter, 300mm long plus 2 metres of lead) to put into your process, covering the range of 30 to 1300°C.

The controller displays the current temperature measured by the thermocouple, to either 1° or 0.1° resolution (depending on configuration). The unit can also be used with other types of thermocouple or an RTD by reconfiguring the controller. The unit can be configured to 'latch' if thermocouple input temperature goes above the controller's alarm value (the alarm will need to be acknowledged by the user before power is restored to the connected load) or to restore the power once the thermocouple input temperature goes below the controller's alarm value.

• Universal 3-pin mini plug input for thermocouples, RTDs, etc
• °C or °F display
• Red indicator shows when process is over-temperature

The InstCube 3216L SSR temperature control box is a wall-mounting compact ABS plastic enclosure with Eurotherm 3216L PID digital controller, 25A rated Solid State Relay (SSR) and a 13A mains socket. It is designed for precise control of heating (or cooling) equipment that is fitted with a standard 13A UK mains plug.

• Universal 3-pin mini plug input for thermocouples, RTDs, etc
• Autotune function sets optimum PID control values for your process
• Minimum On, and Off, time can be set from 0.1 to 150 seconds
• Setpoint Ramp Rate can be used to ensure a gradual increase (or decrease) in temperature
• °C or °F display
• Amber indicator shows when output is on

Related Products: Similar products, accessories and other products suitable for use with this product.

InstCube nanodac Temperature Process Recorder & Alarm Unit (Webshop Standard)

Product Code: INSTCUBEABSNANODAC

Price:   £950.00

Quantity:

Estimated Availability: 5 - 10 days

This is the Webshop Standard version of the InstCube nanodac, with four universal 3-pin inputs for thermocouples or RTDs, USB port for memory stick data download and audible alarm, all include in the price.

The InstCube nanodac is a compact wall mounting 4 channel temperature recorder unit, with user definable alarm, using the Eurotherm nanodac™. It enables you record and monitor your processes easily with four highly accurate measurement channels - no wiring, no fuss.

• Records 4 inputs for thermocouples, RTDs, dc volts or mA, via a 2 or 3-pin mini plug
• High accuracy measurement
• Fast sampling; up to 125ms (8Hz) parallel sampling
• 14 virtual channels (maths, totalisers and counters)
• Add your own plain text names for channels
• 3.5" full colour TFT display, 320 x 240 pixels
• Real-time view and historical data review
• Customise views to suit your application:- horizontal or vertical trends,horizontal or vertical bar graphs, or numeric view
• User configurable audible and visual alarms
• 50MB of internal recording memory
• USB port for exporting data to a memory stick (up to 8GB)
• CSV or UHH secure data file format (21 CFR Part 11 compliant)
• Comes with Eurotherm software on DVD:- iTools with Wizards, Review and QuickChart Lite, Security Manager, 6000 Series Tools

Related Products: Similar products, accessories and other products suitable for use with this product.