£10 off when ordering 2 or more

Many laboratory ovens, furnaces and incubators that are left unattended overnight are not fitted with over-temperature protection as standard. This is a potentially dangerous Health and Safety risk. Retrofitting by the manufacturer is expensive and takes the unit out of commission while the work is done.

The answer is "InstCube". The wall-mounted unit, fitted with a Omron digital indicating controller and power relay, is a self-contained over-temperature control unit, which just plugs into your existing system. No wiring, no fuss.

Fitted with a 13 amp UK plug for a 230V socket, and a 13 amp controlled output socket in which to plug the furnace, oven or incubator to be protected, it comes complete with a type 'N' thermocouple (3mm diameter, 300mm long plus 2 metres of lead) to put into your process, covering the range 0 to 1100°C.

The unit has a loud audible buzzer alarm that can be configured independently of the output alarm or disable.

The controller displays the current temperature measured by the thermocouple to 1° resolution. The unit can also be used with other types of thermocouple or an RTD by reconfiguring the controller. The unit can be configured to 'latch' if thermocouple input temperature goes above the controller's alarm value (the alarm will need to be acknowledged by the user before power is restored to the connected load) or to restore the power once the thermocouple input temperature goes below the controller's alarm value.

• Universal 3-pin mini plug input for thermocouples, RTDs, mA or Volts
• °C or °F display
• Audible Buzzer Alarm
• Red indicator shows when process is over-temperature

Sensor Input: Supplied with, and configured for, a Type N thermocouple.
If reconfigured: Thermocouple, RTD*, milliamps*, volts* (*via 3-pin plug, ordered seperately if required)
      Thermocouple: Type B, J, K, N, R, S, T (and others)
      RTD: 2 or 3-wire PT100
      milliamps: 0 - 20mA, 4 -20mA
      Volts: 1 - 5V, 0 - 5V, 0 - 10V
Resolution: 1°
Output: 13A UK mains (BS 1363) socket
Buzzer: 90dBA, Pulse
Supply Voltage: 230Vac ( ±10%), 50Hz
Dimensions: 200 x 150 x 110mm (W x H x D)
IP Rating: IP20

Supplied Thermocouple: Type N Mineral Insulated Thermocouple, 3mm dia., 300mm long , 2m PVC lead with mini plug (INSTCUBEMI-N-300-3.0)

Appearance will vary from image shown. Additional options and bespoke builds may be available on request, please contact us for details.