Precision Humidity Instruments from Rotronic

Rotroinc Part No: HC2-S

The HygroClip2 is a completely new type of probe in a class of its own in terms of accuracy and performance. Using Rotronic AirChip3000 technology, it boasts a unique calibration and adjustment process as well as many other superb innovations. At the same time Rotronic has taken humidity measurement technology to a whole new level of performance and reliability: the HygroClip2 offers you the best possible reproducibility and a superb system accuracy of < ±0.8 %rh and ±0.1°C. As standard, they all have high accuracy, which can be increased further by specific adjustments within our patented AirChip, making every probe in our range a high-end product for all applications.

This probe can be used in the HygroPalm 22 (sold separately) or connected to a computer using a USB data cable and software (sold separately).

Measurement Range: 0 - 100 %rh, -100 - 200°C
Electronics Operating Range: 0 - 100 %rh, -50 - 100°C
Resolution: Typically 0.02 %rh, 0.01°C
Accuracy: ±0.8 %rh, ±0.1°C
Response time: <15sec
Long term stablity: <1 %rh, 0.1°C per year
Factory Adjustment Points: At 23 °C and 10, 35, 80 %rh
Material: Black Polycarbonate housing
Filter: Polyethylene filter included
Humidity Sensor: Hygromer IN-1
Temperature Sensor: PT100 1/3 DIN Class B
Dimensions: 92mm long x 15mm dia
Weight: 10g
Supply Voltage: 3.2 - 5VDC, 4mA

Related Products: Similar products, accessories and other products suitable for use with this product.

Rotroinc Part No: HP22

The HygroPalm 22 is a hand-held instrument with interchangeable probe for the measurement of humidity and temperature featuring an integral 2000 point memory and USB interface. The HP22 interfaces with the standard HygroClip2 (HC2-S) probe for environmental measurements, and with the HK25/HK40 probes for measurement in ducts or high temperature applications.

Thanks to the digital interface between the HygroPalm hand-helds and the HygroClip probes, the instrument can be easily applied to a wide variety of other applications such as paper, food, powders and granules. Measurements can also be displayed on the backlit LCD in terms of dew/frost point, with other parameters and functions available, including the transfer of probe log data, when connected to a PC running HW4 software.

• Interchangeable probes (sold seperately)
• Instrument operating range 0 - 100 %rh / -10 - 60°C
• Saves up to 2,000 measurement pairs
• Measurement range 0...100%rh, -100 - 200 °C (probe-dependent)
• All psychrometric calculations available
• Adapter for PT100 temperature probes
• Min./ Max., Average Functions
• Backlit Display
• Low Battery Indication
• Min./ Max., Average Functions

Related Products: Similar products, accessories and other products suitable for use with this product.

Rotroinc Part No: NSP-PCB-TF

Rotronic offer a range of filters for optimum protection of the sensors. The right filter will give optimum performance regarding sensor protection and probe response times. The filter is suitable for use with the Rotronic HC2-S probe.

Body Material: Polycarbonate, black
Element Material: Teflon

Rotroinc Part No: NSP-PCB-PE

Rotronic offer a range of filters for optimum protection of the sensors. The right filter will give optimum performance regarding sensor protection and probe response times. The filter is suitable for use with the Rotronic HC2-S probe.

Body Material: Polycarbonate, black
Element Material: Polyethylene, grey

Rotroinc Part No: NSP-PCB-WM

Rotronic offer a range of filters for optimum protection of the sensors. The right filter will give optimum performance regarding sensor protection and probe response times. The filter is suitable for use with the Rotronic HC2-S probe.

Body Material: Polycarbonate, black
Element Material: Wire mesh

Rotroinc Part No: HW4-E

The new Rotroinc devices are equipped with a practical interface for configuration of the devices and for the display and recording of data. The Rotroinc HW4 software is one of the most comprehensive and user-friendly validated software packages available on the market today.

• Display of an unlimited number of loggers and measured values
• Monitoring (one device at a time), data logger programming, data retrieval, scaling, device settings, alarm function, service and configuration tool for Rotroinc devices, date/time synchronisation, adjustment and calibration of Rotroinc probes

Rotroinc Part No: AC3001L

A data cable which plugs into the USB port of a computer to allow Rotronic HW4 software to communicate with a Rotronic HygroClip 2 probe. The probe end has a long shaft which can used as a handle.

Related Products: Similar products, accessories and other products suitable for use with this product.

Rotroinc Part No: E2-02A

A black 2 metre long extension cable for use with a HygroClip probe.

Rotroinc Part No: AC3006

A data cable which plugs into the USB port of a computer to allow Rotronic HW4 software to communicate with a Rotronic instrument, such as a HygroPalm 22 instrument.