Web Shop » Temperature Sensors & Accessories » Thermocouple Temperature Sensors » AMS 2750E Nadcap Compliant Thermocouples » Type N MI Thermocouples, Batch UKAS Calibrated for AMS 2750E, 3mm diameter with 500mm lead & mini plug
Type N Mineral Insulated (MI) Inconel sheathed thermocouples in a 3mm diameter with 500mm twin-twisted PFA leads and terminating in a moulded mini plug. These thermocouples are available in 1 and 1.5 metre sheath lengths and are suitable for temperatures up to 1220°C. These thermocouples are produced from batch calibrated cable and conform to AMS 2750E. These thermocouples are AMS 2750E Nadcap compliant and suitable for Secondary Standard (3.1.4), Temperature Uniformity Surveys (3.1.5), System Accuracy Tests (3.1.6), Control Recording and Monitoring (3.1.7) and Load (3.1.8). Each thermocouple has a unique label attached, giving full traceability to a UKAS Calibration Certificate, which gives the calibration results of the two samples for each end of the roll (22.214.171.124) used to make the thermocouples, expressed suitable for Nadcap audit.Temperature Ranges: +400°C to 1220°C (400 - 1100°C for continuous use)Batch Calibration Points: 400 & 1200°C in 100°C intervals One Calibration Certificate is supplied with every order.Note: These temperatures apply to the MI sheath, the pot seal temperature and tails should not exceed 135°C.