Web Shop » Temperature Sensors & Accessories » Thermocouple Temperature Sensors » AMS 2750E Nadcap Compliant Thermocouples » Type N MI Thermocouple, Batch UKAS Calibrated for AMS 2750E, 2mm diameter, 3.5mtr long with a fixed mini plug
Type N Mineral Insulated (MI) Nicrobel sheathed thermocouples in a 2mm diameter terminating in a fixed mini plug. Available in a 3.5 metre sheath length and are suitable for temperatures up to 1220°C, produced from batch calibrated cable they conform to AMS 2750E. Supplied with a UKAS calibration certificate. These thermocouples are AMS 2750E Nadcap compliant and suitable for Secondary Standard (3.1.4), Temperature Uniformity Surveys (3.1.5), System Accuracy Tests (3.1.6), Control Recording and Monitoring (3.1.7) and Load (3.1.8). Each thermocouple has a unique label attached, giving full traceability to a UKAS Calibration Certificate, which gives the calibration results of the two samples for each end of the roll (184.108.40.206) used to make the thermocouples, expressed suitable for Nadcap audit.Temperature Ranges: +20°C to 1220°C (20 - 1100°C for continuous use)Batch Calibration Points: 20, 100, 200, 300, 400, 500, 550, 600, 650, 700, 750, 800, 900, 1000, 1100, 1200 & 1220°COne Calibration Certificate is supplied with every order.Note: These temperatures apply to the MI sheath, the pot seal temperature and tails should not exceed 135°C.