Portable & In-Process Data Loggers from Hanwell

The humbug data logger has been designed with size in mind, measuring in at only 105 x 65 x 19 mm These smart loggers are ideal for situations where logging may be temporary, for enclosing with a valuable shipment or situations where a wired or radio system is not the best solution. Collected data is download via USB to a computer using the Hanwell W200 Windows software (sold separately) and can be easily analysed in graphical or tabular form.

Requires: Hanwell W200 Software and USB Data Lead

Operating Range: -34°C to 66°C
Accuracy: ±0.2°C
Temperature Resolution: 0.1°C
Humidity Resolution: 0.1%
Intervals: 10 seconds to 24 hours
Memory: 100,000 samples
Battery: 2x AAA Alkaline (supplied) - lasts 5 years at 15 min intervals
Data Transfer Cable: USB mini B male to USB A male (not supplied)
Sensors: Band gap (temperature), Capacitive polymer (humidity)
Enclosure: 114.3 x 71.12 x 22.86 mm
Weight: 100g without battery
Alarms: High/low limits exceeded, Pass/fail alarm indicator

Related Products: Similar products, accessories and other products suitable for use with this product.

Note: Limited Availability

The HTL-1000 High Temperature Submersible Logger is designed for use in tough, high temperature environments where there is a requirement for accurate and reliable temperature data. The logger itself is encased in 303 stainless steel to protect the electronics from damage. The high stability temperature sensor can be supplied either hardwired to the logger body, or on a 350mm silicone cable.
Unlike most Dataloggers on the market, all Hanwell loggers, including the htl-1000, are designed with calibration in mind, subsequent recalibration can be carried out at our lab.
The logger can be set to record data at any user defined period from 1 second to 18 hours, and can hold up to 8172 records.
The logger is programmed and downloaded via high speed serial communications and the Hanwell W200 Windows software (sold separately). This software allows swift analysis of the data, providing graphical views, summaries and text views, as well as exporting the data to CSV format.

Requires: Hanwell W125 Software and Hanwell Y003 Serial Data Transfer Lead

Ingress Protection Rating: IP67
Dimensions: 95 x 34 mm diameter
Power Supply: 1 x 3.6V Lithium AA
Battery Life: Up to 5 years (depending on use)
Data Transfer Cable: USB mini B male to USB A male (not supplied)
Case Material(s): 303 stainless steel
Operating Humidity Range: 0-100% non condensing
Operating Temperature Range: -35°C to +105°C or +0°C to +150°C (depending on model selected)

Related Products: Similar products, accessories and other products suitable for use with this product.

The HL4106 data logger has two sensors as standard: a precision temperature probe and a high quality humidity probe. These sensors can be calibrated by the users or at our calibration laboratory. Each unit has an LCD screen simultaneously displaying the most recent readings taken and the predicted battery life.

Requires: Hanwell W200 Software and USB Data Lead

Dimensions: 110 x 80 x 35mm
Weight: 200 grams
Power Supply: 3.6 Volt AA Lithium battery
Data Transfer Cable: USB mini B male to USB A male (not supplied)
Battery Life: 18 months
Case Materials: ABS & PC
Operating Humidity Range: 0 to 100% non-condensing
Operating Temperature Range: -15° to +65° C
Memory Capacity: 100,000 readings

Temperature
Sensor: Precision thermistor
Range: -15° to +65° C
Accuracy: ± 0.2° C between -15° C to +65° C
Resolution: 0.1° C

Humidity
Sensor: Capacitive polymer
Range: 0 to 100% non-condensing
Accuracy: +/- 3% RH
Resolution: 0.1°% RH

Related Products: Similar products, accessories and other products suitable for use with this product.

The HL4401 & HL4402 are precision 4-wire PT100 temperature measuring devices. The HL4401 has a single channel the HL4402 is dual channel. The sensors are connected via 5 pin Lemo plugs and sockets. Each 4000 unit reads its on-board sensors providing accurate and reliable information about environmental conditions. The sensors can be calibrated by the either user or at our calibration laboratory. Each unit has an LCD screen simultaneously displaying the most recent readings taken and the predicted battery life.
The logger has enough internal memory to store up to 100,000 readings and is in fact continually logging guaranteeing 100% validity of the data. The data can be downloaded via the high speed USB connection directly into the PC software (W200 available separately). The moulded case allows easy access to the battery and USB socket, as well as having slots to fit onto secure wall brackets (Y119 available separately).

Requires: Hanwell W200 Software and USB Data Lead

Dimensions: 110 x 80 x 35mm
Weight: 200 grams
Power Supply: 3.6 Volt AA Lithium battery
Data Transfer Cable: USB mini B male to USB A male (not supplied)
Battery Life: 18 months
Case Materials: ABS & PC
Operating Humidity Range: 0-100% non-condensing
Operating Temp Range: -20° to +60° C
Memory Capacity: 100,000 readings

Input: 4 wire PT100
Range: -100 to +110°C
Accuracy: ± 0.1° C
Resolution: 0.1° C

Related Products: Similar products, accessories and other products suitable for use with this product.

Note: Limited Availability

The W125 Hanwell software for Microsoft Windows allows downloading and analysis of the data from Hanwell data logger, including the HTL1000.

The W200 Hanwell software for Microsoft Windows allows swift analysis of the data, providing graphical views, summaries and text views, as well as exporting the data to CSV format.

Note: Limited Availability

A 1.5m long serial cable for transfering data between a Hanwell HTL1000 data logger and a computer, with RS-232 9-pin female connector which plugs into a computer and propriatory connector to plug into the data logger.

A secure wall mounting bracket for use with Hanwell RL4106, RL4401 or RL4402 data loggers.