Temperature & Process Controllers

The C50 is a simple low-cost on/off Controller suitable for a wide range of applications including OEMs, consumer foods, ovens, HVAC and utilities (backup).

• High visibility dual 4-digit display
  Shows set point and process variable
• Standard relay or logic control output
  Simple time proportioning or on/off control
• Alarm relay
  To give high/low process alarm
• Universal process input
  For a thermocouple, RTD, linear milliamps, linear volts or linear millivolts input
• IP65 (NEMA3) protection and full noise immunity
  For reliability in the harshest environments
• One-shot autotune
  For automatic setting of optimum PID values

1/8th DIN PID Process Controller
The C100 Universal Process controller is a highly versatile, single loop controller designed to be exceptionally easy to operate and set up.
Universal input and integral transmitter power supply ensure that the C100 has the capabilities to measure a wide range of process signals such as temperature, pressure, flow and level.
Analog, logic and relay control outputs are all fitted as standard.
The configuration of the C100 is simply achieved by moving the security switch and entering a simple code from the front panel keys. No passwords, no input links, no complications.
With hose-proof front panel protection and superior RF immunity as standard the C100 has been designed to control reliably in the harshest of today's industrial environments.

• PID controller with 'one shot' auto-tune, single loop, heat/cool and ramp/soak as standard.
• Quick code front face for easy commissioning and operation.
• Universal process input with transmitter power supply allowing direct connection for any process signal.
• Hose-proof front panel and full noise immunity to ensure reliability in the harshest environments.

Wall/Pipe-mount Universal Process Controller
The C310 Wall/pipe-mount Universal Process Controller is a highly versatile single-loop controller packaged in a robust field-mounting housing.
No need to fit an expensive instrument panel when installing or upgrading process equipment. The C310 can be rapidly commissioned by simply fixing it to any flat surface or pipe and making the electrical connections via the cable entry glands on the underside of the unit.
The instrument has extensive control and i/o capabilities fitted as standard, allowing it to be rapidly configured for almost any application.
With IP66/NEMA4X water/dust protection the C310 can be mounted right next to your process, no matter how harsh the environment.

• Single output, Heat/Cool or Motorized Valve control, making the C310 a controller for any PID control application.
• 9 program, 30 segment Ramp/Soak allowing comprehensive set point profiling capabilities.
• Analog, relay and logic outputs included as standard.
• Universal process input with 0.1% accuracy allows for direct connection of any process signal.
• Simple installation without recalibration.
• IP66/NEMA 4X wall/pipe-mountable housing.

1/4 DIN Mulit-Recipy Process Controller
The C360 Profile Controller has advanced ramp/soak profiling to make the operation as simple and as easy as possible for the operator. A dedicated display shows, at a glance, set point, process variable, current program/segment and time remaining in that segment. Three LEDs indicate the direction of the segment, either ramping up/down or in a soak, while the profile is running.
To give a simplified operator interface, specialized buttons have been included to Run/Hold or Stop the profile and to increase or decrease the time remaining in the current segment.
Special features include guaranteed ramp/soak, self-seeking set point, four time events (which can be allocated to relays as common events), maths, alarm and interlocking logic as well as cascade control for complex applications. The C360 has a NEMA4X/IP66 front face making it ideal for use in the harshest of environments.

• Dedicated for ramp/soak profile applications - Easy to use and follow customized display with direct control of the profile.
• Simple selection of multi-segment profiles - 99 segments and 20 profiles, configurable via the PC Configurator or front facia.
• Clear multicolour display with fingertip adjustment - Displays current program/segment, set point, time remaining and profile status.
• Automatic operation with manual override - Dedicated switches to Run/Hold or Stop and selection of profiles.
• Comprehensive input/output capabilities - Three analog inputs, two analog outputs, up to four relays and four digital inputs, plus RS485 Modbus for total flexibility.
• Guaranteed ramp/soak with individual hysteresis - Ensuring product quality, whatever the process conditions.
• Self-seeking set point function - Save process startup time, reduce costs.
• Easy-clean NEMA4X/IP66 front face - Ideal for hose-down and harsh applications.

The C501 is a versatile single-loop controller with advanced control features built-in as standard, e.g. gain scheduling, process optimization, alarm logic, maths and linearizers.
The instrument can be commissioned using a built-in library of application templates and advanced autotune facilities. Configurations can also be edited and stored offline using our Windows™-based PC Configurator.
A wide range of process connections is included in the standard instrument.
IP66 (NEMA 4X) front panel protection makes the C501 an extremely robust controller, suitable for use in a wide variety of industrial environments.

• PID control with easily programmed standard templates - single loop, heat/cool, motorized valve, auto/manual station, indicator, analog backup.
• Clear process display and color-coordinated switches allow clear process visibility and ease of operation.
• Comprehensive input/output capabilities with up to three analog inputs, two analog outputs, four relays and four digital inputs
• Loop-break alarm, processor watchdog, password protection and intelligent power recovery for increased process security
• Unique Control Efficiency Monitor (CEM) with two Autotune algorithms plus manual fine-tuning using CEM
• PC configuration for ease of setup, easy access to advanced features and standard settings.
• IP66/NEMA4X front face ensures reliability in the harshest environments.

The C505 is an advanced multi-role controller with the capability of handling single loop and cascade applications.
The instrument can be commissioned in minutes using a built-in library of application templates and advanced autotune facilities. Configurations can also be edited and stored off-line using our Windows™-based PC Configurator.
A wide range of process connections is included in the standard instrument. IP66 (NEMA 4X) front panel protection makes the C505 an extremely robust controller, suitable for use in a wide variety of industrial environments.

• Multiple PID control capabilities - single loop, feedforward, cascade, feedforward with cascade, ratio, auto/manual station, analog backup, heat/cool
• Clear process display and color-coordinated switches allow clear process visibility and ease of operation.
• Comprehensive input/output capabilities with up to three analog inputs, two analog outputs, four relays and four digital inputs.
• Loop-break alarm, processor watchdog, password protection and intelligent power recovery for increased process security
• Unique Control Efficiency Monitor (CEM) with two Autotune algorithms plus manual fine-tuning using CEM
• PC configuration for ease of setup, easy access to advanced features and standard settings.
• IP66/NEMA4X front face ensures reliability in the harshest environments.

Compact 1/32nd DIN Autotune PID temperature controller
The CAL 32E controller is designed to be easy to use, low-cost and reliable. It features CAL's auto-tune, which makes P.I.D. control simple, the controller's self-tune function can automatically selects the optimum P.I.D. values. The CAL 32E accepts nine common thermocouple types as inputs, as well as 2-wire RTDs, and has SSR Driver and Relay outputs. The CAL 32E is an economy version of the CAL 3200.

• Ultra-compact size: 24mm x 48mm
• Autotune PID for easy set-up
• Dual-output: 2A relay plus SSR drive
• IP65/ Nema 4X sealed fascia
• 4 bright LEDs to 1° or 0.1° in °C or °F
• CE, UL & CSA approvals
• 3-year warranty
• Positive feel buttons
• 5 alarm modes
• 9 thermocouples, RTD/PT100 inputs
• removable rear screw terminal block

1/32ND DIN 48 x 24 mm Temperature Controller
The 'L' suffix on this product means it is a fixed build OEM standard model; no additional options, configuration or calibration are offered on this version of the instrument.

The CAL 3300L controller is designed to be easy to use, low-cost and reliable. It features CAL's auto-tune, which makes P.I.D. control simple, the controller's self-tune function can automatically selects the optimum P.I.D. values. It also has CAL's unique dAC function to minimise the overshoot problem associated with conventional P.I.D. control. It accepts nine common thermocouple types as inputs, as well as 2-wire RTDs, and has an SSR Driver and Relay output.

• Full PID auto-tuning
• Dual-outputs
• Alarms with 5 options
• PID heat-cool operation
• Ramp & soak operation
• Sleeve mounting for easy maintenance
• Bright LED displays
• IP66 protection from front panel
• CE, UL & CSA approvals
• 3-year warranty

1/16th DIN 48 x 48 mm Programmable Temperature / Process Controller
The 'L' suffix on this product means it is a fixed build OEM standard model; no additional options, configuration or calibration are offered on this version of the instrument.

The CAL 9500PL is a versatile programmable controller for temperature and process control applications and is designed to offer the highest functionality in a 48mm x 48mm (1/16TH DIN) package. Its combination of programmable ramp/soak profiles, process control and temperature inputs, and 3 outputs makes the CAL 9500PL a unique and affordable package.

• Full PID auto-tuning process controller
• Alarms with 5 options
• Heat-cool operation
• Programmer operation
• Sleeve mounting for easy maintenance
• IP66 protection from front panel
• CE, UL & CSA approvals
• 3-year warranty

The 2132 PID temperature controller uses advanced PID algorithms to give stable 'straight line' temperature control. Self-tuning is included to optimise the control performance without the need for specialist knowledge or training. It has 9 internally stored thermocouple types and the Pt100 resistance thermometer as well as linear process inputs. Linear inputs can be scaled to the desired display range. Two outputs are configurable for heating, cooling or alarms. Three internal alarm set points are provided, configurable as high, low or deviation alarms. The alarms can be 'blocked' at start-up to prevent unnecessary operator alerts.

• Reliable performance and accuracy
• Simple operation
• Internal timer - a 5 mode timer suitable for simple time based profiling applications
• Three internal alarms
• Up to two relay outputs
• One logic input or output
• IP65 Rated Front Face

1/16th DIN (48 x 48mm) PID Process Controller
The innovative 3216 controller offer precision control of temperature and other process variables together with a host of advanced features not normally found in this class of controller. The emphasis is on simplicity and ease of use. A simple 'QuickStart' code can be used to configure all the essential functions, including input sensor type, measurement range, control options and alarms - making 'Out of the Box' operation truly achievable.

• Internal timer and set point programming.
• Quick and easy commissioning with one shot auto-tuning.
• Easy, comprehensive operator information with custom messages.
• Clear alarm information.
• Heater failure detection and integral ammeter display.
• IP65 (NEMA 4X) rated front panel.

1/16th DIN (48 x 48mm) PID Process Controllers
The Eurotherm 3216L is an entry level PID process controller in 1/16th DIN size. It provides precision control of temperature or other press variables at a very affordable price. It is simple to use and set up with its Quick Code to configure the input sensor type and outputs to control you process. Output options include relay and logic SSR drive in heat only or heat/cool configuration, or the relays can be used as latching alarms. Autotune can be used to improve control performance or the PID control values can enter manually. The front facia is IP65 sealed so it can be washed down.

See the data sheet for more Information

1/4th DIN (96 x 96 mm) Controller
The UDC100 is a low-cost 1/4th DIN, microprocessor-based controller designed for basic temperature applications. A large dial allows easy adjustment of the set point. Its simple ON-OFF control algorithm makes the UDC100 ideal for such applications as food processing (bakery ovens), small industrial furnaces and ceramics kilns. Configured and calibrated.

• Single Loop Control
• Time Proportioning Control Output
• 0.5% Accuracy
• IP54 Rated Front Face